• 3-6 Volt DC Motor with triple winding "never stuck" coils.
• 1:48 ratio gearbox with dual output shafts - can be used with 1 or 2 wheels.
• Wired 2-pin 0.1" socket power connector.
• Two 60mm (2.35") plastic wheels with grippy rubber treads provided.

The M1W2 is a geared DC motor with two 60mm wheels, ready to put your breadboard circuits in motion. It runs on 3 to 6 Volts, so a PW-3AA battery box is all you need to get it turning. A 1:48 gearbox trades speed for torque and drives two output shafts, so you can fit one wheel or both.

The motor uses triple winding "never stuck" coils, and its wired 2-pin 0.1" socket connects to standard 0.1" pitch jumper wires such as ZipWires. The plastic wheels have grippy rubber treads for traction on desks and floors. Swap the two power wires to reverse the direction. It makes a good first motor for Junior Genius projects and classroom robot builds.