PW-1AAX™

1AA Battery Holder, 15cm wires with reliable breadboard pins

  • Provides 1.5 Volt power from 1 AA cell (not included).
  • Smooth machined male pins designed for breadboard use.
  • Great for use with solderless breadboards (such as the BB830 and BB400).
  • 26AWG stranded wire, 15cm wire+pin length, strain relief heatshrink tubing.

The PW-1AAX holds a single AA cell and brings its 1.5 Volt output straight to your breadboard on 15cm wires. Smooth machined male pins plug firmly into solderless breadboards such as the BB400 and BB830, and strain relief heatshrink tubing keeps the joint between wire and pin from fatiguing over repeated use.

A single cell suits low-voltage experiments: low-voltage experiments, from measuring a cell with a multimeter to a first lesson in voltage and current. Most LEDs need more than 1.5V to light, so pair LED circuits with the PW-3AA instead. Like any alkaline cell, the voltage drops gradually as the battery drains, so circuits that need a fixed supply should use a regulator. For 4.5 Volts with an on/off switch, see the PW-3AA.

.

JRG01-KIT

Junior Genius Blinky Lights Kit

JRG01-PCB

Junior Genius Blinky Lights Solder Kit

BB400

BreadBoard-400 (400 point BreadBoard)

BB830

BreadBoard-830 (830 point BreadBoard)

ZW-MF-10

ZipWire, Male-Female, 10cm, 40 Unzippable Wires

SB5

SB5 Snappable PCB BreadBoard